mmap of/ dev/mem échoue avec un argument invalide pour l'adresse de virt to phys, mais l'adresse est alignée sur la page
pour une raison quelconque, mon mmap
a échoué avec un message Invalid argument
même si mon offset est aligné. La taille de la Page est de 4096 octets. Aussi CONFIG_STRICT_DEVMEM
est désactivé, i.e. je peux accéder à la mémoire au-dessus de 1MB.
Voici mon code:
void *mmap64;
off_t offset = 0x000000d9fcc000;
int memFd = open("/dev/mem", O_RDWR);
if (-1 == memFd)
perror("Error ");
mmap64 = mmap(0, getpagesize(), PROT_WRITE | PROT_READ, MAP_SHARED, memFd, offset);
if (MAP_FAILED == mmap64) {
perror("Error ");
return -1;
}
Quelqu'un peut-il expliquer pourquoi cela se produit?
MODIFIER
voici le strace
de mon code
execve("./to_phys_test", ["./to_phys_test", "-r"], [/* 18 vars */]) = 0
brk(0) = 0x2012000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe240a2c000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=162063, ...}) = 0
mmap(NULL, 162063, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe240a04000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "7ELF"151910920""151910920""151910920""151910920""151910920""151910920""151910920""151910920""151910920""151910920">"151910920""151910920""151910920""151910920"P "151910920""151910920""151910920""151910920""151910920""..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1840928, ...}) = 0
mmap(NULL, 3949248, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe240447000
mprotect(0x7fe240601000, 2097152, PROT_NONE) = 0
mmap(0x7fe240801000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1ba000) = 0x7fe240801000
mmap(0x7fe240807000, 17088, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fe240807000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe240a03000
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe240a01000
arch_prctl(ARCH_SET_FS, 0x7fe240a01740) = 0
mprotect(0x7fe240801000, 16384, PROT_READ) = 0
mprotect(0x601000, 4096, PROT_READ) = 0
mprotect(0x7fe240a2e000, 4096, PROT_READ) = 0
munmap(0x7fe240a04000, 162063) = 0
open("/dev/mem", O_RDWR) = 3
open("/dev/my_kmodule", O_RDWR) = 4
ioctl(4, 0x40086e00, 0x7ffc72b334b0) = 0
fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe240a2b000
write(1, "sa.size = 44n", 13) = 13
write(1, "sa.addr_uint64_t = d9047000n", 28) = 28
write(1, "sa.addr_void_ptr = 0xd9047000n", 30) = 30
write(1, "PAGE_SIZE = 4096n", 17) = 17
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 3, 0xd9047000) = -1 EINVAL (Invalid argument)
dup(2) = 5
fcntl(5, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE)
brk(0) = 0x2012000
brk(0x2033000) = 0x2033000
fstat(5, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe240a2a000
lseek(5, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(5, "Error : Invalid argumentn", 25) = 25
close(5) = 0
munmap(0x7fe240a2a000, 4096) = 0
exit_group(-1) = ?
+++ exited with 255 +++
1 réponses
nopat
argument en ligne de commande du noyau
il suffit d'ajouter que et il fonctionne, comme indiqué à: https://stackoverflow.com/a/36634422/895245
voici ma configuration de test:
#include <asm/io.h> /* virt_to_phys */
#include <linux/debugfs.h>
#include <linux/delay.h> /* usleep_range */
#include <linux/kernel.h>
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/seq_file.h> /* single_open, single_release */
#include <linux/slab.h> /* kmalloc, kfree */
static volatile u32 *i;
static struct dentry *debugfs_file;
static int show(struct seq_file *m, void *v)
{
seq_printf(m,
"*i 0x%llx\n"
"i %p\n"
"virt_to_phys 0x%llx\n",
(unsigned long long)*i,
i,
(unsigned long long)virt_to_phys((void *)i)
);
return 0;
}
static int open(struct inode *inode, struct file *file)
{
return single_open(file, show, NULL);
}
static const struct file_operations fops = {
.llseek = seq_lseek,
.open = open,
.owner = THIS_MODULE,
.read = seq_read,
.release = single_release,
};
static int myinit(void)
{
i = kmalloc(sizeof(i), GFP_KERNEL);
*i = 0x12345678;
debugfs_file = debugfs_create_file(
"lkmc_virt_to_phys", S_IRUSR, NULL, NULL, &fops);
return 0;
}
static void myexit(void)
{
debugfs_remove(debugfs_file);
kfree((void *)i);
}
module_init(myinit)
module_exit(myexit)
MODULE_LICENSE("GPL");
#!/bin/sh
set -ex
insmod /virt_to_phys.ko
cd /sys/kernel/debug
cat lkmc_virt_to_phys
# *i = 0x12345678
addr=$(grep virt_to_phys lkmc_virt_to_phys | cut -d ' ' -f 2)
devmem2 "$addr"
devmem2 "$addr" w 0x9ABCDEF0
cat lkmc_virt_to_phys
# *i = 0x9ABCDEF0
rmmod virt_to_phys
nopat
étant passé à: https://github.com/cirosantilli/linux-kernel-module-cheat/blob/2eca9280e12dbab79ccb67d0640b2a0edc2c9ffc/runqemu#L65
essayez aussi xp
sur le moniteur QEMU.
et devmem2
est repris par Buildroot lui-même: http://free-electrons.com/pub/mirror/devmem2.c Voir aussi: accéder à l'adresse physique à partir de l'espace utilisateur