Prendre des captures d'écran de la fenêtre active?

Rectangle bounds = Screen.GetBounds(Point.Empty);
using(Bitmap bitmap = new Bitmap(bounds.Width, bounds.Height))
{
    using(Graphics g = Graphics.FromImage(bitmap))
    {
         g.CopyFromScreen(Point.Empty, Point.Empty, bounds.Size);
    }
    bitmap.Save("test.jpg", ImageFormat.Jpeg);
}

pour la capture de fenêtre en cours d'utilisation

 Rectangle bounds = this.Bounds;
 using (Bitmap bitmap = new Bitmap(bounds.Width, bounds.Height))
 {
    using (Graphics g = Graphics.FromImage(bitmap))
    {
        g.CopyFromScreen(new Point(bounds.Left,bounds.Top), Point.Empty, bounds.Size);
    }
    bitmap.Save("C://test.jpg", ImageFormat.Jpeg);
 }

je suggère la solution suivante pour capturer n'importe quelle fenêtre active courante (pas seulement notre application C#) ou l'écran entier avec la détermination de la position du curseur par rapport au coin supérieur gauche de la fenêtre ou de l'écran respectivement:

public enum enmScreenCaptureMode
{
    Screen,
    Window
}

class ScreenCapturer
{
    [DllImport("user32.dll")]
    private static extern IntPtr GetForegroundWindow();

    [DllImport("user32.dll")]
    private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect);

    [StructLayout(LayoutKind.Sequential)]
    private struct Rect
    {
        public int Left;
        public int Top;
        public int Right;
        public int Bottom;
    }

    public Bitmap Capture(enmScreenCaptureMode screenCaptureMode = enmScreenCaptureMode.Window)
    {
        Rectangle bounds;

        if (screenCaptureMode == enmScreenCaptureMode.Screen)
        {
            bounds = Screen.GetBounds(Point.Empty);
            CursorPosition = Cursor.Position;
        }
        else
        {
            var foregroundWindowsHandle = GetForegroundWindow();
            var rect = new Rect();
            GetWindowRect(foregroundWindowsHandle, ref rect);
            bounds = new Rectangle(rect.Left, rect.Top, rect.Right - rect.Left, rect.Bottom - rect.Top);
            CursorPosition = new Point(Cursor.Position.X - rect.Left, Cursor.Position.Y - rect.Top);
        }

        var result = new Bitmap(bounds.Width, bounds.Height);

        using (var g = Graphics.FromImage(result))
        {
            g.CopyFromScreen(new Point(bounds.Left, bounds.Top), Point.Empty, bounds.Size);
        }

        return result;
    }

    public Point CursorPosition
    {
        get;
        protected set;
    }
}

voici un extrait pour capturer le bureau ou la fenêtre active. Il n'y a aucune référence aux formulaires Windows.

public class ScreenCapture
{
    [DllImport("user32.dll")]
    private static extern IntPtr GetForegroundWindow();

    [DllImport("user32.dll", CharSet = CharSet.Auto, ExactSpelling = true)]
    public static extern IntPtr GetDesktopWindow();

    [StructLayout(LayoutKind.Sequential)]
    private struct Rect
    {
        public int Left;
        public int Top;
        public int Right;
        public int Bottom;
    }   

    [DllImport("user32.dll")]
    private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect);

    public static Image CaptureDesktop()
    {
        return CaptureWindow(GetDesktopWindow());
    }

    public static Bitmap CaptureActiveWindow()
    {
        return CaptureWindow(GetForegroundWindow());
    }

    public static Bitmap CaptureWindow(IntPtr handle)
    {
        var rect = new Rect();
        GetWindowRect(handle, ref rect);
        var bounds = new Rectangle(rect.Left, rect.Top, rect.Right - rect.Left, rect.Bottom - rect.Top);
        var result = new Bitmap(bounds.Width, bounds.Height);

        using (var graphics = Graphics.FromImage(result))
        {
            graphics.CopyFromScreen(new Point(bounds.Left, bounds.Top), Point.Empty, bounds.Size);
        }

        return result;
    }
}

comment capturer l'écran entier:

var image = ScreenCapture.CaptureDesktop();
image.Save(@"C:\temp\snippetsource.jpg", ImageFormat.Jpeg);

comment capturer la fenêtre active:

var image = ScreenCapture.CaptureActiveWindow();
image.Save(@"C:\temp\snippetsource.jpg", ImageFormat.Jpeg);

à l'Origine trouvé ici: http://www.snippetsource.net/Snippet/158/capture-screenshot-in-c

le code de KvanTTT a bien fonctionné. Je l'ai étendu un peu pour permettre un peu plus de flexibilité sur le format de sauvegarde, ainsi que la possibilité de sauvegarder par hWnd, .net Contrôle/forme. Vous pouvez obtenir un bitmap ou enregistrer au dossier, avec quelques options.

using System;
using System.Drawing;
using System.Drawing.Imaging;
using System.IO;
using System.Runtime.InteropServices;
using System.Windows.Forms;

namespace MosaiqPerformanceMonitor {
     public enum CaptureMode {
          Screen, Window
     }

     public static class ScreenCapturer {
          [DllImport("user32.dll")]
          private static extern IntPtr GetForegroundWindow();

          [DllImport("user32.dll")]
          private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect);

          [StructLayout(LayoutKind.Sequential)]
          private struct Rect {
                public int Left;
                public int Top;
                public int Right;
                public int Bottom;
          }

          [DllImport("user32.dll", CharSet = CharSet.Auto, ExactSpelling = true)]
          public static extern IntPtr GetDesktopWindow();

          /// <summary> Capture Active Window, Desktop, Window or Control by hWnd or .NET Contro/Form and save it to a specified file.  </summary>
          /// <param name="filename">Filename.
          /// <para>* If extension is omitted, it's calculated from the type of file</para>
          /// <para>* If path is omitted, defaults to %TEMP%</para>
          /// <para>* Use %NOW% to put a timestamp in the filename</para></param>
          /// <param name="mode">Optional. The default value is CaptureMode.Window.</param>
          /// <param name="format">Optional file save mode.  Default is PNG</param>
          public static void CaptureAndSave(string filename, CaptureMode mode = CaptureMode.Window, ImageFormat format = null) {
                ImageSave(filename, format, Capture(mode));
          }

          /// <summary> Capture a specific window (or control) and save it to a specified file.  </summary>
          /// <param name="filename">Filename.
          /// <para>* If extension is omitted, it's calculated from the type of file</para>
          /// <para>* If path is omitted, defaults to %TEMP%</para>
          /// <para>* Use %NOW% to put a timestamp in the filename</para></param>
          /// <param name="handle">hWnd (handle) of the window to capture</param>
          /// <param name="format">Optional file save mode.  Default is PNG</param>
          public static void CaptureAndSave(string filename, IntPtr handle, ImageFormat format = null) {
                ImageSave(filename, format, Capture(handle));
          }

          /// <summary> Capture a specific window (or control) and save it to a specified file.  </summary>
          /// <param name="filename">Filename.
          /// <para>* If extension is omitted, it's calculated from the type of file</para>
          /// <para>* If path is omitted, defaults to %TEMP%</para>
          /// <para>* Use %NOW% to put a timestamp in the filename</para></param>
          /// <param name="c">Object to capture</param>
          /// <param name="format">Optional file save mode.  Default is PNG</param>
          public static void CaptureAndSave(string filename, Control c, ImageFormat format = null) {
                ImageSave(filename, format, Capture(c));
          }
          /// <summary> Capture the active window (default) or the desktop and return it as a bitmap </summary>
          /// <param name="mode">Optional. The default value is CaptureMode.Window.</param>
          public static Bitmap Capture(CaptureMode mode = CaptureMode.Window) {
                return Capture(mode == CaptureMode.Screen ? GetDesktopWindow() : GetForegroundWindow());
          }

          /// <summary> Capture a .NET Control, Form, UserControl, etc. </summary>
          /// <param name="c">Object to capture</param>
          /// <returns> Bitmap of control's area </returns>
          public static Bitmap Capture(Control c) {
                return Capture(c.Handle);
          }


          /// <summary> Capture a specific window and return it as a bitmap </summary>
          /// <param name="handle">hWnd (handle) of the window to capture</param>
          public static Bitmap Capture(IntPtr handle) {
                Rectangle bounds;
                var rect = new Rect();
                GetWindowRect(handle, ref rect);
                bounds = new Rectangle(rect.Left, rect.Top, rect.Right - rect.Left, rect.Bottom - rect.Top);
                CursorPosition = new Point(Cursor.Position.X - rect.Left, Cursor.Position.Y - rect.Top);

                var result = new Bitmap(bounds.Width, bounds.Height);
                using (var g = Graphics.FromImage(result))
                     g.CopyFromScreen(new Point(bounds.Left, bounds.Top), Point.Empty, bounds.Size);

                return result;
          }

          /// <summary> Position of the cursor relative to the start of the capture </summary>
          public static Point CursorPosition;


          /// <summary> Save an image to a specific file </summary>
          /// <param name="filename">Filename.
          /// <para>* If extension is omitted, it's calculated from the type of file</para>
          /// <para>* If path is omitted, defaults to %TEMP%</para>
          /// <para>* Use %NOW% to put a timestamp in the filename</para></param>
          /// <param name="format">Optional file save mode.  Default is PNG</param>
          /// <param name="image">Image to save.  Usually a BitMap, but can be any
          /// Image.</param>
          static void ImageSave(string filename, ImageFormat format, Image image) {
                format = format ?? ImageFormat.Png;
                if (!filename.Contains("."))
                     filename = filename.Trim() + "." + format.ToString().ToLower();

                if (!filename.Contains(@"\"))
                     filename = Path.Combine(Environment.GetEnvironmentVariable("TEMP") ?? @"C:\Temp", filename);

                filename = filename.Replace("%NOW%", DateTime.Now.ToString("yyyy-MM-dd@hh.mm.ss"));
                image.Save(filename, format);
          }
     }
}

je suppose que vous utilisez Graphics.CopyFromScreen pour obtenir la capture d'écran.

vous pouvez utiliser P/invoquer pour GetForegroundWindow ( et puis obtenir sa position et la taille ) pour déterminer quelle région vous devez copier.

vous pouvez utiliser le code de cette question: Comment puis-je enregistrer une capture d'écran directement dans un fichier sous Windows?

il suffit de changer WIN32_API.GetDesktopWindow() à la propriété Handle de la fenêtre que vous voulez capturer.

une petite modification à la méthode imagesave du vide statique () vous donnera l'option où le sauvegarder. Le crédit va à Microsoft (http://msdn.microsoft.com/en-us/library/sfezx97z.aspx)

static void ImageSave(string filename, ImageFormat format, Image image, SaveFileDialog saveFileDialog1)
    { 
        saveFileDialog1.Filter = "JPeg Image|*.jpg|Bitmap Image|*.bmp|Gif Image|*.gif";
        saveFileDialog1.Title = "Enregistrer un image";
        saveFileDialog1.ShowDialog();

        // If the file name is not an empty string open it for saving.
        if (saveFileDialog1.FileName != "")
        {
            // Saves the Image via a FileStream created by the OpenFile method.
            System.IO.FileStream fs =
               (System.IO.FileStream)saveFileDialog1.OpenFile();
            // Saves the Image in the appropriate ImageFormat based upon the
            // File type selected in the dialog box.
            // NOTE that the FilterIndex property is one-based.
            switch (saveFileDialog1.FilterIndex)
            {
                case 1:
                    image.Save(fs,
                       System.Drawing.Imaging.ImageFormat.Jpeg);
                    break;

                case 2:
                    image.Save(fs,
                       System.Drawing.Imaging.ImageFormat.Bmp);
                    break;

                case 3:
                    image.Save(fs,
                       System.Drawing.Imaging.ImageFormat.Gif);
                    break;
            }

            fs.Close();
        }



    }

Votre événement button_click doit être codé quelque chose comme ça...

private void btnScreenShot_Click(object sender, EventArgs e)
    {

        SaveFileDialog saveFileDialog1 = new SaveFileDialog();


        ScreenCapturer.CaptureAndSave(filename, mode, format, saveFileDialog1);

    }//

si vous voulez utiliser le code géré: ceci capturera n'importe quelle fenêtre via le ProcessId.

j'ai utilisé ce qui suit pour rendre la fenêtre active.

Microsoft.VisualBasic.Interaction.AppActivate(ProcessId);
Threading.Thread.Sleep(20);

j'ai utilisé l'écran d'impression pour capturer une fenêtre.

SendKeys.SendWait("%{PRTSC}");
Threading.Thread.Sleep(40);
IDataObject objData = Clipboard.GetDataObject();

utiliser le code suivant:

            // Shot size = screen size
            Size shotSize = Screen.PrimaryScreen.Bounds.Size;

            // the upper left point in the screen to start shot
            // 0,0 to get the shot from upper left point
            Point upperScreenPoint = new Point(0, 0);

            // the upper left point in the image to put the shot
            Point upperDestinationPoint = new Point(0, 0);

            // create image to get the shot in it
            Bitmap shot = new Bitmap(shotSize.Width, shotSize.Height);

            // new Graphics instance 
            Graphics graphics = Graphics.FromImage(shot);

            // get the shot by Graphics class 
            graphics.CopyFromScreen(upperScreenPoint, upperDestinationPoint, shotSize);

            // return the image
            pictureBox1.Image = shot;

basé sur la réponse D'ArsenMkrt, mais celui-ci vous permet de capturer un contrôle dans votre forme (j'écris un outil par exemple qui a un contrôle WebBrowser en elle et que vous voulez capturer juste son affichage). Note the use of Pointttoscreen method:

//Project: WebCapture
//Filename: ScreenshotUtils.cs
//Author: George Birbilis (http://zoomicon.com)
//Version: 20130820

using System.Drawing;
using System.Windows.Forms;

namespace WebCapture
{
  public static class ScreenshotUtils
  {

    public static Rectangle Offseted(this Rectangle r, Point p)
    {
      r.Offset(p);
      return r;
    }

    public static Bitmap GetScreenshot(this Control c)
    {
      return GetScreenshot(new Rectangle(c.PointToScreen(Point.Empty), c.Size));
    }

    public static Bitmap GetScreenshot(Rectangle bounds)
    {
      Bitmap bitmap = new Bitmap(bounds.Width, bounds.Height);
      using (Graphics g = Graphics.FromImage(bitmap))
        g.CopyFromScreen(new Point(bounds.Left, bounds.Top), Point.Empty, bounds.Size);
      return bitmap;
    }

    public const string DEFAULT_IMAGESAVEFILEDIALOG_TITLE = "Save image";
    public const string DEFAULT_IMAGESAVEFILEDIALOG_FILTER = "PNG Image (*.png)|*.png|JPEG Image (*.jpg)|*.jpg|Bitmap Image (*.bmp)|*.bmp|GIF Image (*.gif)|*.gif";

    public const string CUSTOMPLACES_COMPUTER = "0AC0837C-BBF8-452A-850D-79D08E667CA7";
    public const string CUSTOMPLACES_DESKTOP = "B4BFCC3A-DB2C-424C-B029-7FE99A87C641";
    public const string CUSTOMPLACES_DOCUMENTS = "FDD39AD0-238F-46AF-ADB4-6C85480369C7";
    public const string CUSTOMPLACES_PICTURES = "33E28130-4E1E-4676-835A-98395C3BC3BB";
    public const string CUSTOMPLACES_PUBLICPICTURES = "B6EBFB86-6907-413C-9AF7-4FC2ABF07CC5";
    public const string CUSTOMPLACES_RECENT = "AE50C081-EBD2-438A-8655-8A092E34987A";

    public static SaveFileDialog GetImageSaveFileDialog(
      string title = DEFAULT_IMAGESAVEFILEDIALOG_TITLE, 
      string filter = DEFAULT_IMAGESAVEFILEDIALOG_FILTER)
    {
      SaveFileDialog dialog = new SaveFileDialog();

      dialog.Title = title;
      dialog.Filter = filter;


      /* //this seems to throw error on Windows Server 2008 R2, must be for Windows Vista only
      dialog.CustomPlaces.Add(CUSTOMPLACES_COMPUTER);
      dialog.CustomPlaces.Add(CUSTOMPLACES_DESKTOP);
      dialog.CustomPlaces.Add(CUSTOMPLACES_DOCUMENTS);
      dialog.CustomPlaces.Add(CUSTOMPLACES_PICTURES);
      dialog.CustomPlaces.Add(CUSTOMPLACES_PUBLICPICTURES);
      dialog.CustomPlaces.Add(CUSTOMPLACES_RECENT);
      */

      return dialog;
    }

    public static void ShowSaveFileDialog(this Image image, IWin32Window owner = null)
    {
      using (SaveFileDialog dlg = GetImageSaveFileDialog())
        if (dlg.ShowDialog(owner) == DialogResult.OK)
          image.Save(dlg.FileName);
    }

  }
}

ayant L'objet Bitmap que vous pouvez simplement appeler enregistrer sur elle

private void btnCapture_Click(object sender, EventArgs e)
{
  webBrowser.GetScreenshot().Save("C://test.jpg", ImageFormat.Jpeg);
}

ce qui précède suppose que le GC va saisir le bitmap, mais il est peut-être préférable d'attribuer le résultat de someControl.getScreenshot () vers une variable Bitmap, puis disposer de cette variable manuellement une fois terminée, surtout si vous faites souvent cet accaparement (par exemple si vous avez une liste de pages Web que vous voulez charger et enregistrer des captures d'écran):

private void btnCapture_Click(object sender, EventArgs e)
{
  Bitmap bitmap = webBrowser.GetScreenshot();
  bitmap.ShowSaveFileDialog();
  bitmap.Dispose(); //release bitmap resources
}

mise à jour:

maintenant outil de WebCapture est ClickOnce-déployé ( http://gallery.clipflair.net/WebCapture ) à partir du web (dispose également d'une belle prise en charge d'autoupdate grâce à ClickOnce) et vous pouvez trouver son code source à http://ClipFlair.codeplex.com .